|
****JavaScript based drop down DHTML menu generated by NavStudio. (OpenCube Inc. - http://www.opencube.com)****


|
Don't let the cool air that you paid your hard-earn money for escape just because you have inadequate insulation. Having proper insulation throughout your entire home not only promotes a more energy efficient house but it can also save you substantial cooling expense over the years.
Having the correct type and amount of insulation in all the appropriate areas of your home is critical to its comfort and energy efficiency. Let our experts at A-Star Heat and Air, Inc. evaluate your existing insulation and show you how we can improve the comfort and energy efficiency of your home.
|
|
|
You may be asking yourself, "Why do I need insulation in my home?" Your answer is actually quite simple! Insulation is used to keep hot outdoor air out of your home and to keep cool air inside your home. Thus, you increase the efficiency of your air conditioning and heating system and ensure your family's total comfort. Other reasons to install insulation are to lower energy bills during the hottest and coldest times of the year and reduced outside noise infiltration.
|
|
You may also be asking yourself, "How is insulation performance measured?" Below we have an easy to understand explanation of how insulation performance is measured.
|
|
Insulation performance is measured by its ability to resist heat flow. This measure is calculated by *R-value. The higher the R-values translate to more insulating power. R-values are recommended for walls, attics, basements and crawlspaces, depending on your area of the country. Insulation works best when air is not moving through or around it, therefore it is very important to seal air leaks before installing insulation to ensure that you get the best performance from the insulation.
|
|
In fact, according to a recent study on energy consumption it was found that approximately 65% of U.S. homes have insulation levels that are below the 2000 IECC (International Energy Conservation Code) levels. This translates to more than 800 trillion BTU’s (British Thermal Units) that could be saved each year. Properly insulated new homes would save 300 billion BTUs each year. This is equivalent to 28 supertankers of crude oil and 300 billion cubic feet of natural gas.
|
|
Don't let an under-insulated attic drain your home of money and warmth.
|
|
*R-value means resistance to heat flow. The higher the R-value, the greater the insulating power.
|
|
At A-Star Heat and Air, Inc., we understand how important it is for our customers to lower your energy costs. Now is the time to take action! We will recommend the proper level of insulation for your attic, schedule an installation time, and get you on the road to lowering your energy bills.
Increases the comfort of your home year-round!
Save the environment and save on energy costs!
By installing insulation, you are on your way to reducing energy costs. Adding fiber glass insulation above minimum building requirements whether you are a business or home owner, you significantly increase energy savings, and enhance the overall quality of your indoor environment.
|
|
Please contact our experts at A-Star Heat and Air, Inc. to schedule your consultation. We can be reached at 972-485-0813. For your convenience, you may also request services from this site. |
|
Thank you for your interest in A-Star Heat and Air, Inc. We look forward to serving you soon!
|
|
Financing Available |
972-485-0813
|
Since 1996 |
 |
Serving The Dallas Texas Area
|
TACLB-00028662E |
|
Home
| About Us
| Services
| HVAC Repair
| HVAC Installation
| Products
Other Services
| Ventilation
| Radiant Barrier
| Duct Cleaning
| Insulation
Special Offers
| F.A.Q.
| Testimonials
| Request Services
| Contact Us
© 2011 A-Star Heat and Air, Inc. All rights reserved.
Website Design by Brymels & Associates.
DHTML Menu / JavaScript Menu Powered By OpenCube
|